Certified Building Contractor CBC1265305 · Certified Roofing Contractor CCC1334811
Home Remodeling, repaired or rebuilt in Sea Ranch Lakes, FL
Home Remodeling for homes in Sea Ranch Lakes and the surrounding area — permitted, inspected and closed out. Free estimate.
In Sea Ranch Lakes, a gated village tucked behind the Atlantic dune line, a remodel that has stalled usually traces back to the permit path: work that was never permitted, a permit left open, or a plan that skipped the inspections a wall removal or layout change calls for. The village is almost entirely single-family homes built from the mid-1950s through the 1970s, and the village sits in the High-Velocity Hurricane Zone. Older concrete block and stucco houses can hide past work that was done without a permit, and changes to the exterior shell carry stricter wind requirements here.
Final Touch Builders remodels and builds under one permit, so repairs, layout changes and additions are handled as a single job. We are a Florida Certified Building Contractor (CBC1265305). We give you a free estimate and a written scope before work starts. When the work needs a permit, we pull it under our own certification, schedule the inspections, and close the permit out at the end.
Sea Ranch Lakes homes are mid-century block-and-stucco houses with terrazzo or tile floors and attached garages, and they sit steps from the ocean. Salt air and humidity are hard on older wiring, plumbing, hardware and exterior openings, so a remodel often turns up work that needs to be brought up to current code. Because the village is gated and staffed at the entrance, contractors generally need advance authorization from the homeowner to be admitted. We plan crew and delivery access around that, and around any HOA or village rules that apply to your property, before the first day on site.
Permits, inspections and close-out in Sea Ranch Lakes
Start with what gets permitted. A remodel in Sea Ranch Lakes typically needs permits for structural changes, wall removal, changes to electrical, plumbing, mechanical or gas systems, and window and door changes. Painting, flooring and cabinet replacement usually do not need one. Next come inspections. A permitted job generally runs from permit application, to work, to in-progress inspections where the code requires them (such as framing or anchoring while it is visible), to a final inspection. The exact sequence varies, so confirm it with the building department that issues permits for your address. Third is product approval. Because the village is in the High-Velocity Hurricane Zone, exterior products such as windows, doors and garage doors need a Miami-Dade Notice of Acceptance. The last step is close-out: after the final inspection the permit must be closed. Unpermitted work or an open permit can come up at sale, when a loan is renewed or reworked, or at insurance renewal, and code enforcement may cite it. Florida generally requires a licensed contractor for structural remodeling and separately licensed electrical, plumbing and mechanical contractors for those trades. The Florida DBPR regulates licensing, and our Certified Building Contractor license is CBC1265305. Confirm all local requirements with the building department before work begins.
Problems to watch for in Sea Ranch Lakes
Unpermitted work from a past owner
In houses dating from the 1950s to the 1970s, earlier alterations may never have been permitted. That can surface when you apply for a new permit, when the home is sold, or at insurance renewal.
Open or expired permits
A permit that was never closed out can be cited by code enforcement and cause delays when you sell the home. Sorting out the permit history is often the first step before new work.
Wall removals in block construction
Opening up a mid-century concrete block layout usually involves structural questions and a permit. The framing or support work generally has to be inspected while it is still visible.
Garage and porch conversions
Turning an attached garage or porch into living space changes the exterior envelope and usually the electrical and air-conditioning work as well. In the HVHZ, new exterior openings need products with a Miami-Dade Notice of Acceptance.
Older wiring and plumbing
Remodeling in a house from this era can expose outdated electrical and plumbing that has to be addressed to meet the current Florida Building Code. Those trades are separately licensed and usually permitted on their own.
Salt-air wear on hardware and finishes
Coastal air corrodes fasteners, hinges, locks and exposed hardware faster than it does inland. Specifying corrosion-resistant materials during a remodel helps the finished work last.
What we do
- Whole-home and room remodelsWe plan the scope in writing, build it under one contract, and coordinate the trades so permits and inspections stay in sequence.
- Wall removals and layout changesWe handle the permitted structural work for opening up block-and-stucco floor plans, and we schedule the inspections the work requires.
- Garage and porch conversionsWe convert attached garages and porches into finished living space. Any exterior openings or products we add must meet HVHZ requirements, including Miami-Dade approval for products installed in the exterior envelope.
- Flooring and interior finishesWe replace tile, terrazzo and other floors and install interior finishes. This kind of finish work often does not need its own permit, but we confirm that against the rest of the scope.
- Permit close-outA job is finished when it is permitted, inspected and closed out. We follow the project through to the final inspection and close the permit.
When to call
Interior remodeling can be done year-round, but the cooler, drier months from November to April are often when homeowners schedule it, including seasonal residents opening up their homes. Exterior phases are best planned around the May to October wet season, which brings daily thunderstorms and blowing rain, and around hurricane season, which runs June 1 to November 30. Gate access has to be arranged with you ahead of time. To get started, call (954) 620-7812 or send a quote request through the form on this page. The estimate is free.
We serve Sea Ranch Lakes village and nearby areas including Lauderdale-by-the-Sea, Galt Ocean Mile, Coral Ridge, Coral Ridge Isles, Imperial Point, Bay Colony, Hillsboro Beach, Lighthouse Point and Palm Aire in Pompano Beach.
Remodeling in Sea Ranch Lakes: questions we hear
- Does a remodel in Sea Ranch Lakes need a permit?
- Structural changes, wall removal, electrical, plumbing, mechanical or gas changes, and window or door changes usually do. Cosmetic work like painting or flooring often does not. Confirm with the local building department before work starts.
- Is the HVHZ product approval rule relevant here?
- Yes. Sea Ranch Lakes is in the High-Velocity Hurricane Zone, so exterior products such as windows, doors and garage doors installed in a remodel or conversion need a Miami-Dade Notice of Acceptance.
- What if a previous owner did work without a permit?
- Unpermitted work can surface when you pull a new permit, when you sell, or at insurance renewal, and code enforcement may cite it. Check with the building department on how to resolve it, and we can help scope the work to bring it into compliance.
- How does the gated entrance affect a remodel?
- The village is gated and staffed, and contractors generally need advance authorization from the homeowner to be admitted. We coordinate with you so crews and deliveries can get in.
- Who closes out the permit?
- We do. When the work needs a permit, we pull it under our own certifications, schedule the inspections and close the permit after the final inspection.
Request a free remodeling estimate in Sea Ranch Lakes
Tell us about the project. A state-certified contractor will get back to you.
Prefer to talk?
(954) 620-7812